Adhesive transfer tape
| Adhesive： | Acrylic |
| Release liner： | Release paper |
| Description： | High adhesion Adhesive transfer tape is coated with Acrylic on release paper |
| Adhesion： | > 800 g/25mm |
| Total thickness(withoutRelease liner)： | 0.03 mm ~ 0.11 mm (Custom） |
| Feature： |
■ SR17 series Acrylic has excellent Three high performance
(initial strength, adhesion, retention). Excellent tensile
properties of the adhesive layer, which can effectively
reduce the overflow of adhesive and wire drawing during die
cutting ■ S13 seriesAcrylic, harder colloid, with high cohesion and temperature resistance, can effectively reduce the problem of adhesive overflow and wire drawing when processing die cutting ■ S07 series adhesive, soft gel, with high initial strength and high adhesion, suitable for foam bonding |
| Applications： |
■Adhesive transfer tape should pay attention to the
following －The generation of static electricity when the list is attached to the volume will cause the release failure －The end face is prone to overflow adhesive when slitting －It needs to be stored in the constant temperature list to avoid adhesive overflow in the later period ■ Adhesive for general conventional materials ■ Replace 3M 467 |
| TY No. | TY W001, TY W006 |
| Adhesive： | Acrylic |
| Release liner： | Release paper |
| Description： | Textured Adhesive transfer tape is coated with Acrylic on the Release paper Single surface of the mesh |
| Adhesion： | > 800 g/25mm |
| Total thickness(withoutRelease liner)： | 0.03 mm ~ 0.11 mm (Custom） |
| Feature： |
■Textured design, with excellent venting effect, the bubble
prevents the convex hull and makes the bonding more smooth ■ Textured is very suitable for bonding and bonding in large areas |
| Applications： |
■ Suitable for large-area lamination ■ Applications Laminate parts that have high requirements on flatness ■ Can replace 3M 9617 |
| TY No. | TY W003-Y |
| Adhesive： | Conductive adhesive |
| Release liner： | Release paper |
| Description： | Conductivity Adhesive transfer tape is coated with Conductivity Adhesive on the side of release paper |
| Adhesion： | > 800 g/25mm |
| Total thickness(withoutRelease liner)： | 0.03 mm ~ 0.1 mm (Custom） |
| Feature： |
■ N67 series adhesive has high initial strength and adhesion ■ Good Conductive performance, resistance value <0.05Ω (not including customized Thickness) ■ Isotropic Conductive Glue ■ Color and Thickness of the adhesive layer can be customized |
| Applications： | ■ Adhesives for conventional Conductive materials, such as Foil, Conductive cloth, Conductive tissue, Conductive foam, etc |
| TY No. | TY E005-C |
| Adhesive： | Flame retardant adhesive |
| Release liner： | Release paper |
| Description： | Flame retardant Adhesive transfer tape is coated with Flame retardant adhesive on release paper |
| Adhesion： | > 500 g/25mm |
| Total thickness(withoutRelease liner)： | 0.11 mm (Custom） |
| Feature： |
■ Environment-friendly Flame retardant adhesive (without
halogen) ■ Passed UL94 certification, Flame retardant level reaches VTM-0 |
| Applications： | ■ General Conventional Flame retardant material adhesive, such as Flame retardant PET, PI/Kapton, aramid paper/Nomex, etc |
| TY No. | TY W101-HF |
